Workshops


CAD/CAM Preparation and Cementation - SOLD OUT

Tutor: Dr. Eduardo Mahn, Chile
01st May, 2013 (09:00 - 16:30)
JW Marriott Marquis Hotel Dubai, UAE
9.5 CME Hours HAAD | 4 CME Hours MOH

Course Description: show/hide
  • Biological background
  • Burs, turbines, micromotor, oscillating instruments
  • Preparation techniques for CAD/CAM restorations
  • Preparation rules for veneers, crowns, bridges, inlays, onlays/overlays, conventional and adhesive preparations
  • Clinical cases discussion, preparation rules for the different type of materials (Feldspathic blocks, Leucite reinforced blocks, lithium disilicate blocks, Zirconia blocks, etc
  • Cementation techniques (short overview)

  • Hands-on:
  • Preparation of an Inlay/Onlay
  • Preparation of a posterior full-crown and anterior thin crown
  • Cementation of an Onlay and an anterior crown

Course Programme: show/hide
09:00 - 10:00
  • Biological background
  • Burs, turbines, micromotor, oscillating instruments
  • Preparation techniques for CAD-CAM restorations
  • Preparation rules for veneers, crowns, bridges, inlays, onlays/overlays, conventional and adhesive preparations
10:00 - 10:30 Coffee break
10:30 - 11:30 Clinical cases discussion, preparation rules for the different type of materials (Feldspathic blocks, Leucite reinforced blocks, lithium disilicate blocks, Zirconia blocks, etc.
Cementation techniques (short overview)
11:30 - 12:30 Hands-on:
Preparation of an Inlay/Onlay
12:30 - 14:00 Lunch
14:00 - 15:30 Hands-on:
Preparation of a posterior full-crown and anterior thin crown
15:30 - 16:30 Hands-on:
Cementation of an Onlay and an anterior crown
16:30 Discussion and end of program

3D Imaging Workshop

Introduction to Computer-Guided Implantology: Training on Accuguide® Program

Tutor: Dr. Philippe Tardieu, France
03rd May, 2013 (10:45 - 12:45)
JW Marriott Marquis Hotel Dubai, UAE
4 CME Hours HAAD | 4 CME Hours MOH

Course Description: show/hide

Abstract:
Hands-on will allow dentist to work on the AccuGuide® program and discover all the friendly and useful tools to include in an every day practice. This workshop is dedicated to dentists who wish starting working in Computer-guided Implantology to improve their skill and confidence. The world of images in coming into dental practices but very often, dentists can hardly understand what kind of tools should be the best for them to integrate this world. Most of the systems are closed and protected by strong monopoles. Dentists are perplexed about the use of these tools. AccuGuide® software program is an open program, it is a new and innovative suite of modules in the field of computer guided implantology and diagnosis (impacted teeth, tumors, nerve path...). AccuGuide® software includes 3 modules: U Treat for image treatment, U Plan for implant planning and U Design to design surgical guides. Each participant is invited to bring his own lap top and computer mouse to be able to take profit of the workshop. We'll deliver a free demo program and cases for each participant. Computer must be tested to get the good requirements to run the program.

Aim of the lecture and workshop
Introduce participants to computer-guided implantology. Allow each participant to be able to import a DICOM file, clean, treat and segment this CT scan, plan one implant and understand how to order and use a surgical guide.

Mandatory conditions
- This training session is opened to dentists, oro-maxilofacial surgeons, dental lab technicians and radiologists.
- Participants must come with their lap top and a mouse.
The minimum requirements to run AccuGuide® program is:
- a computer running either Windows XP or Windows 7.
- the computer may be a Mac running Windows XP or Windows 7 thanks to Parallels Desktop v6.
- with 2Go RAM at least
- with a graphic card having at least 256Mo video memory, supporting OpenGL 2.0.
Before the workshop it is mandatory to run the Test configuration program to check if the lap top is working well enough to load and work on AccuGuide® program.

Indirect Veneers - SOLD OUT

Tutor: Dr. Munir Silwadi, UAE
04th May, 2013 (09:00 - 18:00)
6.5 CME Hours HAAD | 4 CME Hours MOH
3M Innovation Center, Dubai Internet City, Dubai, UAE

Course Description: show/hide
  • Introduction to Ceramic Veneers
  • Case and Shade Selection Guidelines
  • Preparation, Impression, and Temporization Guidelines
  • Clinical Bonding Protocol

  • Hands On:
  • Preparation, Temporization, and Bonding

Course Programme: show/hide
09:00 - 09:45 Introduction to Ceramic Veneers
09:45 - 10:30 Case and Shade Selection Guidelines
10:30 - 11:00 Break / Discussion
11:00 - 11:45 Preparation, Impression, and Temporization Guidelines
11:45 - 12:30 Clinical Bonding Protocol
12:30 - 13:00 Discussion
13:00 - 14:00 Light Lunch
14:00 - 18:00 Hands On: Preparation, Temporization, and Bonding

Smile Design with Minimal Invasive Digital and Traditional Tools - SOLD OUT

Tutor: Dr. Eduardo Mahn, Chile
04th May, 2013 (09:00 - 17:00)
JW Marriott Marquis Hotel Dubai, UAE
8.75 CME Hours HAAD | 4 CME Hours MOH

Course Description: show/hide
The course will start with a lecture that will cover the facial analysis of the patients, which allows to start the treatments with an esthetic driven approach. Tooth anatomy, proportions and relations within them will be discussed in detail, in order to give the participants the maximum information possible for a complete diagnosis and treatment plan. Digital and traditional mock-up tools will be presented. In addition al modern treatment options will be discussed (bleaching, polishing, direct and indirect veneers, non-prep veneers, thin veneers, edge-ups, etc)

In the afternoon session practical exercises for understanding tooth anatomy will be done. Afterwards a clinical case will be design digitally with a digital mock-up. Afterwards, a model will be analized based on the smile design concepts discussed during the morning session. Based on that, the participants will make a direct mock-up and will create provisional and temporary guides. Minimal preparations will be done and the case will be temporized.

Objectives:
  1. To learn how to diagnose different esthetic clinical challenges
  2. To learn how to digitally design a smile
  3. To learn how to make a traditional mock-up and a digital mock-up
  4. To learn about preparation rules
  5. To learn about tooth proportions and anatomy
Important Note:
All materials necessary for the hands-on course will be provided. Nevertheless it is highly advisable that participants bring their own kit of burs, periodontal probe, ruler, scalpel with blade 11 or 15 if they can. This will help them to work in the same conditions there are used to work in their clinics.
If any participant has a micromotor in their clinic and can bring it, it will be highly appreciated.
Participants should also bring their own notebook with the software powerpoint for PC or Keynote for Mac. If they do not have one, they can work in pair with their partner, since the exercise will be in pairs.

Course Programme: show/hide

09:00 - 11:00
  • Treatment planning for esthetic driven rehabilitations
  • New diagnostic tools
  • Protocol for communication between laboratory and the clinic
  • Biological backround
  • Digital and traditional mock-up
  • Anterior tooth anatomy and esthetic parameters
  • Preparation rules for thin veneers, veneers, anterior crowns and partial crowns.
  • Non-prep veneers, advantages, disadvantages, answers and planning tips for a successful treatment
  • Ceramic materials, new improvements, classification, guidelines for their choice
  • Adhesive cementation, classification of cements, tips and tricks
Lecture
11:00 - 11:15 Coffee break
11:15 - 13:00 Clinical cases discussion Interactive session
13:00 - 14:00 Lunch
14:00 - 15:30
  • Practical exercises to recognize the proper tooth anatomy and proportions
  • Digital mock-up
  • Model analysis
Hands-on
15:30 - 16:30
  • Preparation and correction of the preoperative situation
  • Temporary guide and mock-up preparation
  • Minimal preparation and traditional mock-up
  • Cementation of a veneer
16:30 - 17:00 Discussion and final comments
17:00 End of the program

Sitemap | CAD/CAM & Digital Dentistry International Conference - 8th Edition

Valid XHTML 1.0 Transitional