(Lion Image)

1st ASIA - PACIFIC EDITION

7th CAD/CAM & Computerized Dentistry
International Conference

06 - 07 October 2012, Marina Bay Sands Hotel
SINGAPORE

Confirmed 14 CPE Points
attainable

Organized by

CAPP ASIA

Proud Supporter

SDA - Singapore Dental Association
LATEST NEWS:
Dental Tribune International Editorial (more...) | Welcome Message from Dr. Kuan Chee Keong, SDA President (more...) | Guest of Honnor: Prof. Patrick S K Tseng, BDS, MSc (more...) | Final Program >> (more...) | Conference Certification: 14 CPE Points attainable. |

Speakers


Dr. Peter Gehrke

Dr. Peter Gehrke, Germany



Dr. Peter U. Gehrke completed his graduate studies at the University of Berlin School of Dental Medicine in Germany in 1991, where he received his Approbation as Dentist and his degree as Dr. med. dent. in 1992. Dr. Gehrke pursued postgraduate specialities in Prosthodontics and Implant Dentistry in Germany and was awarded the Schering Pharmaceutical Industries Scholarship. He graduated from New York University College of Dentistry with international postdoctoral training in the Division of Restorative and Prosthodontic Sciences Department of Implant Dentistry. He is co-author of the text book "Fundamentals of Esthetic Implant Dentistry" (Blackwell Publishing), has authored innumerable articles, and lectures nationally and internationally on implant macro- and micro design, biomechanics, and implant prosthodontics. Dr. Gehrke is on the Editorial Advisory Board of TITANIUM, The International Journal of Dental Implants and Biomaterials and an active member of the Academy of Osseointegration, the European Association for Osseointegration, the International College of Prosthodontics, and the German Society of Implantology (DGI).

Lecture 1:: Two-Piece CAD/CAM Zirconia Implant Abutments
Lecture 2:: Optimizing Implant Function and Esthetics at the Perio-Prosthetic Interface: The Role of the Superstructure


Dr. Andreas Kurbad

Dr. Andreas Kurbad, Germany



Dentist in private practice since 1990. CEREC user since 1994.
Member of the editorial board of the International Journal of Computerized Dentistry; German Quintessence Journal of Dental Technology; International Digital Dental News Journal.
More than 100 publications about All-Ceramics, computerized dentistry, implantology, epidemiology. Co-Publisher of the Quintessence book "CAD/CAM and All-Ceramics". Main focus of work, lectures and publications: Restorative dentistry, adhesive technique, all-ceramics, computerized dentistry and implantology.
Since 1996 presenting seminars on clinics of all-ceramics and computerized dentistry. For more than 10 years lecturer at the "Karl-Haupl-Institute" in Dusseldorf. Foundation member of the "Cerec Masters Club".

Lecture 1:: Esthetic Engineering
Lecture 2:: Computer Navigated Implantology


Dr. Simon C. Smyth

Dr. Simon C. Smyth, BDS, ISCD Certified Trainer, UK



Dr. Simon qualified from Newcastle University, UK in 1987 and currently runs a private practice in the South of England with a special interest in CEREC, implant and Bio-Metric dentistry. Acquired CEREC system in 2002 and became one of the first CEREC trainers in June 2003 and ISCD Certified in March 2006 (Berlin). Completed over 4000 restorations ranging from single units to full mouth multi-unit smile make-overs. Dr. Simon regularly holds Basic, Intermediate and Advanced CEREC courses in the UK and has trained over 500 dentists.

Lecture 1: Everyday CAD/CAM Usage: Preparation, Practicality & Possibilities, What Benefit You and Your Practice
Lecture 2: Further Possibilities of CAD/CAM: One Visit Smile Makeovers and Permanent Bridges Chairside


Dr. Umberto de Luca

Dr. Umberto de Luca, Brazil



Graduated by the State University of Rio de Janeiro in 1978 (UERJ).
CAD-CAM technology in restorative dentistry. CEREC method. University of Zurich, Switzerland, 1997.
Full time clinician over 30 years, 21 with the CEREC method.
Former President of the Dental Institute Wladimir Pereira, Rio de Janeiro, founded 28/03/1969.
International speaker, with conferences in several countries of Central and Latin America.
International Trainer of the CEREC method by ISCD (International Society of computerized dentistry).
President of ABOC (Brazilian Academy of Computerized Dentistry) Founded in 1997.

Lecture 1: New Dental Hybrid Material in the CAD/CAM Technology and Its' Opportunities for New Indications
Lecture 2: The Esthetic Limits of CAD/CAM Restorations


Dr. Michael Dieter

Dr. Michael Dieter, Germany



Dr. Michael Dieter, DDS is a dentist from Germany. He studied at the Center of Oral and Dental Medicine at the University of Tubingen, Germany.
Dr. Dieter is practicing private dentistry in Switzerland making use of the latest CAD/CAM technology. Besides, he is also Head of the Professional Services department for Ivoclar Vivadent.

Theatre Presentation:: One-visit chairside dentistry: How to make CAD/CAM Restorations Esthetic and Durable in Clinical Practice


Joerg Vogt

Joerg Vogt, Germany



International CEREC Trainer for Sirona Dental Systems, Bensheim, Germany: Joerg Vogt has given lectures on CAD/CAM in more than 50 countries in the past 12 years. Closely involved with the latest CAD/CAM developments, his key message is how to use a digital device to achieve perfect all-ceramic restorations. In addition to the well documented clinical aspects, a welcome bonus is that it is fun to use for a dentist.

Theatre Presentation:: One-visit chairside dentistry: How to make CAD/CAM Restorations Esthetic and Durable in Clinical Practice


Dr. Paulo Monteiro

Dr. Paulo Monteiro, Portugal



Dr. Paulo Monteiro completed his degree in Dental Medicine at the Instituto Superior de Ciencias da Saude - Sul (ISCSEM), Lisbon, Portugal in 1998.
In 2005 he completed his specialization in Esthetic and Restorative Dentistry at the ISCSEM, Lisbon, Portugal. In 2010 he finished a Master's degree in Dental Medicine and is currently pursuing a PhD in Dentistry at Universidade de Santiago de Compostela, Spain. He has taken the International Professional Course of CAD/CAM technology in Restorative Dentistry, at the University of Zurich in 2008.
Presently, he is an Associate Professor at ISCSEM, for the Aesthetic and Restorative Dentistry Post-graduation program and for the Oral Rehabilitation Department at ISCSEM. In parallel, he is the head of Clinical Aesthetic Dentistry advanced consultation at ISCSEM, the head of Operative Dentistry Technology Training Course for Dental Assistants and the head of Intra-Oral Photography Technology Training Course for Dental Assistants in Egas Moniz, Lisbon, Portugal. He is also involved in research of new dental materials, including composite resins, dental adhesives, dental ceramics and new technologies. He is an active member of the International Association for Dental Research, and regularly presents research in the dental materials field. In his private practice, he devotes himself exclusively to aesthetic and cosmetic dentistry.

Lecture: The Time is NOW! CAD/CAM or Check out!


Mr. Falko Noack

Falko Noack, Germany



Falko Noack has over 8 years of dental technology experience - combined with outstanding studies in Osnabruck to obtain his diploma as a dental technology engineer.
For 6 years he has put this valuable theoretical and practical knowledge to use for developments at AmannGirrbach. He started immediately as a permanent member of the Ceramill Multi-x project team and at the same time was a user in the early days.
As he was also highly qualified for the AmannGirrbach continuing education programme, he gave talks at fairs and conferences and conducted training courses for international business partners.
His competence in this area made him a highly sought-after author for international specialist periodicals in the dental field.
For some months, his special area was characterisation of materials, testing them and subsequently the quality assurance of ZI Blanks. In 2007, he assumed overall responsibility for in-house zirconium oxide blank production for Ceramill ZI.
At IDS 2009, the Ceramill System was followed by the Ceramill Mall, so that AmannGirrbach together with Falko Noack have made the move into digital dental technology. As he is already in charge and is technical project manager in this next stage of development, his writing is all over the CAD/CAM software.
The latest milestone in the collaboration between AmannGirrbach and Falko Noack: Since October 2009 he has been appointed to overall management of applications engineering.

Lecture: Status Quo & Future of Inhouse Production Capabilities in The Modern Dental Lab


Mr. Peter Bausch

Peter Bausch, Germany



Born in 1963, trained as an export trader of 1984 - 1986. Study of the chemistry of 1986 - 1987 in Cologne. Study of food technology from 1987 - 1989 at the Technical University of Munich at Weihenstephan. Personally liable partner in Dr.Jean Bausch GmbH & Co. KG since 1990. From 1990, responsible for product development and intensive research in the field of coating paper and film.
Online Training (distance learning) Lackrostoffe, polymer chemistry, polymer physics and colloid chemistry in cooperation with the University of Paderborn/Niederrhein University 26.04.2004 - 18.07.2004.
Participation in numerous international exhibitions and symposia for dental medicine, especially in the field of functional diagnostics.

Lecture: Importance of Occlusion


Dr. Khaled Abouseada

Dr. Khaled Abouseada, Saudi Arabia



Consultant Orthodontist, Saudi German Hospital, Jeddah. Faculty, Scientific & Certification Board, ClearPath Orthodontics, Jeddah, Saudi Arabia.
Dr. Khaled graduated in 1993 as a dentist and completed Masters degree in Orthodontics in 1995. Started his Orthodontic career in Alexandria University Hospital in 1995. Working in Saudi German Hospitals since 2003.
Dr. Khaled is a Fellow of the World Federation of Orthodontics. He is an International Member of the American Association of Orthodontics (AAO).
Lecturer in SAMT (Specialized academy in Medical Training). Lecturer in Batarji Medical College. Medical director & Orthodontist, Asnani Dental Clinic. Member in multiple regional orthodontic associations. Speaker in 4th CAD/CAM conference 2010. Keynote speaker in 45th Indian Orthodontic Conference on the topic "Clear Revolution in Orthodontics". Speaker in the Grand Orthodontic Conference of the IOA (International Orthodontic Association).
Dr. Khaled has to his credit, various publications in national and international journals. He has lectured at many other international and national dental and orthodontic forums, including the FDI & the WFO. Being the proud holder of 3 international certifications in different aligner systems, he is also a trainer for ClearPath CAD/CAM System. Having completed more than 80 aligner cases and many more still in progress mostly with ClearPath system, these years of aligner practice make him one of the most experienced doctors in the continent to have practiced orthodontic CAD/CAM aligner therapy.

Lecture: ClearPath CAD/CAM Invisible Aligner Orthodontic Treatment


Marcus Kieffer

Marcus Kieffer, Germany



Marcus Kieffer started his career as a dental technician in 1995 but preferred to deal with the lab from the manufacturer side. He is in the industry for more than 10 years now and is well connected to the major distributors worldwide.
Since May, 2011 he is Director of International Sales: Wieland Dental + Technik GmbH & Co. KG, Pforzheim (Germany); Development of new markets, Strategic and operational co-ordination of sales & marketing activities in the key markets for WIELAND. Serving as Vice President International on the Board of WIELAND Dental Systems, a US subsidiary of WIELAND Dental + Technik GmbH & Co KG.

Lecture: Key Trend Digital Dentistry - The future of monolithic ZrO2 restorations


Emidio Cennerilli

Emidio Cennerilli


Born in 1967 in Italy Emidio Cennerilli has a long experience in the Mechanical Cad field starting his professional career as Application Engineer becoming Director of Software Components Division in think3 inc. In 2009 Emidio joint E.G.S. with the role of General manager as Responsible for Product marketing and Sales Operations worldwide, Human Resources and Financing. Emidio became CEO in May 2012.

Luigi Fanin

Luigi Fanin


Born in 1968 in Italy Luigi Fanin is an experienced Mechanical Engineer covering a broad range of engineering fields focused on Computer aided design, Reverse engineering and computer aided manufacturing. Luigi is business development manager and technical trainer for Italian software manufacturer CIM Systems creators of SUM3D CAM specifically designed software solutions for open Dental milling centres.

Lecture: Computer Aided Capture, Design and Manufacturing in Dental Applications


Dr. Mark Morin

Dr. Mark Morin, USA


Dr. Mark Morin graduated from the University of Detroit School of Dentistry in 1985 and began his private practice that same year. In 1989 Dr. Morin became one of the first dentist in the US to use CEREC. His practice is now in the top 1% of all dental practices in the US. In 1992 he created the Great Lakes Education Center, a training center for dentist and staff. Today it continues to be one of the most well attended training centers in the United States with over 5000 graduates to date. He continues to teach and lecture throughout the US and Canada and is a certified trainer with the ISCD. Dentistry Today has ranked Dr. Morin as one of the top dental educators in the United States.

Lecture: Patient Experience - Practice Lifestyle: How CEREC is Revolutionizing Dental Practices Around the World


Sitemap | 7th CAD/CAM & Computerized Dentistry International Conference - 1st Asia-Pacific Edition

Valid XHTML 1.0 Transitional